FOR BILL CALFEE

Ventidue said:
Book package was delivered today at 10:17 hours. Do you have it "in hand"?
Click to expand...

Friend Ventidue:

P1000609.JPG


I just signed your copy of my book....

I can tell you've been reading it as the backbone of the book is well broken down.....

I'll ship it back to you the first of next week, or so...

Your LBK and pistol fool friend, Bill Calfee
 
Please remember to tell the post office that you are sending a book so that you can get a less expensive book rate. Should cost the same to return the book to me as it cost to send the book to you: $5.61

Will read your book M A N Y times. Thank you for sharing your knowledge with all of us.
 
If I wanted someone to build a rifle for me who uses the techniques you have developed, whom would you recommend? I am especially intrigued with the idea of letting the barrel tell you where to locate the breech end and where to cut the crown thus determining the length of the barrel.
 
Ventidue said:
If I wanted someone to build a rifle for me who uses the techniques you have developed, whom would you recommend? I am especially intrigued with the idea of letting the barrel tell you where to locate the breech end and where to cut the crown thus determining the length of the barrel.
Click to expand...

Friend Ventidue:

I'll have your signed copy of my book in the mail to you in a few days....

You asked who uses the techniques I developed that could build you a rifle based on them?

Jeff Patterson is that person....but there's a difference between Jeff and myself....

Jeff builds them much better than I ever did.......

The only bad thing is this.....Jeff is booked....so the chance of getting him to build you a rifle might be slim....although Jeff will have to speak for himself in this matter.

Good luck, your LBK and pistol fool friend, Bill Calfee

P1000609.JPG
 
How can I contact Jeff so that I may ask him? Thank you. I understand you are no longer making rifles. If so, I understand. I am myself a builder of fly rods. After 33 years I decided to "hang it up". The last fly rod I build was back in 2007. I still have on split bamboo rod I build and never used. Been thinking about posting it on eBay and see what happens.
 
Ventidue said:
How can I contact Jeff so that I may ask him? Thank you. I understand you are no longer making rifles. If so, I understand. I am myself a builder of fly rods. After 33 years I decided to "hang it up". The last fly rod I build was back in 2007. I still have on split bamboo rod I build and never used. Been thinking about posting it on eBay and see what happens.
Click to expand...
Friend Ventidue,

Check your private messages.
Jeff Patterson
 
Thank you. Got some reading, re-reading, underlining, note taking, notes in the margins, questions to whcih you may want to reply and generally moving forward,
 
What can you tell me about rifles that you have built with the lighter, small diameter barrels (0.825") that produced "killer" results?
 
Ventidue said:
What can you tell me about rifles that you have built with the lighter, small diameter barrels (0.825") that produced "killer" results?
Click to expand...

Friend Ventidue:

The most important rifle I built using a little .825" diameter barrel is the one I built for Mike Mullins...

With that little .825" diameter Lilja, Mike produced the first ARA 2500 target in history.

This was over 20 years ago.

So a little .825" diameter barrel holds what is probably the most important record in RFBR history.

By the way, Mike Mullins gave me that first 2500 ARA target.....I will cherish it forever.

Your LBK and pistol fool friend, Bill Calfee
 
You must log in or register to reply here.
Back
Top Bottom